a) Because they are versatile and reliable

b) For their robust construction

c) Because all galvanised sheet metal components are powder-painted prior to assembly

d) Because galvanised sheet metal components are not welded

e) Because no self-tapping screws are used, which are likely to damage paint

f) Because transmission organs are not present

g) Because all motors are connected in factory with their own external terminal boards

h) Because electric motors of 200L size or higher are equipped with external regreasing devices

i) Because our water distribution system does not have spray nozzles but non-clogging gravity distributors instead, in AISI 304 stainless steel, connected with nuts and screws to the header

l) Because our water gravity distributor protects the fill surface, avoiding damage caused by water mechanical action onto FILM-type surfaces

m) For our sturdy main header in steel tubing, hot dip galvanised after processing

n) For our strong protective fan exhaust grill

o) Because both fans and the water distribution network are maintenance-free

p) Because they can be equipped with an additional fill section if need be

q) Because they can be equipped with a special fill easy to clean and sanitise which makes them suitable to cool dirty water as well as operate in dusty environments

r) Because they can be supplied in an arrangement suitable to cool water at a temperature of up to 99°C

s) Because the basin volume (where necessary) can be more than doubled if need be

t) Because water inlet connections and outlet connections (where applicable) can be provided on any of the four sides.

a) Reliable

b) They have an extremely robust and long-lasting construction

c) They are assembled on-site, delivered and guaranteed at the assembly site

d) Each cell is independent on both the water and air side

e) Casing in AISI 304 stainless steel

f) All details in black steel are hot dip galvanised after working

g) There are no self-tapping screws or pressure connections

h) All connections are mechanical, with nuts and bolts

i) The fans are factory assembled, interchangeable, finished items

j) No transmission units

k) All motors are connected to their own terminal board which is external to the fan

l) Fan replacement is simple and extremely quick

m) The electric motors of fans (with a power of 15 kW or more - with 8 poles) have external lubricators

n) Because of the water distribution system, comprising carbon steel pipes which are hot galvanised (inside and outside) after working

o) Non-clogging water gravity distributor in AISI 304 stainless steel

p) Because the water gravity distributor protects the exchange surface, avoiding damage caused by the mechanical action of water on the FILM type surface

q) Strong protective fax exhaust grill

r) The fans and the water distribution system are maintenance-free

s) If it's necessary, they can have more section of wet deck surface

t) The cooling towers can cool dirty waters or operate in dusty places if equipped with a suitable drop-breaker section (fill, exchange surface - also assembled) that can be cleaned and sanitised

u) Both the exchange surface and drift eliminators are supported by a sturdy grid in hot galvanised carbon steel, for safe access inside the tower

v) The towers have wide inspection doors, located in the fill and water distribution areas

w) The towers can be supplied with a configuration for cool water with temperatures of up to 99°C.